| FEATURES |
|---|
| – 400C Chrome VIAIR® Compressor w/ Thermal Overload Protector |
| – 1.5 Gallon Matte Black VIAIR® Air Tank (200 PSI) |
| – Illuminated Dash Panel Gauge Kit, Black Face 150 PSI |
| – Sealed Pressure Switch (110 PSI on, 145 PSI off) |
| – 40-Amp Sealed 4-Prong Relay |
| – RV Tire Inflation Gun w/ Digital 180 PSI Gauge |
| – 30ft. Inside Braided Black Coil Hose w/ Quick Connect & stud |
| – 90-Degree Twist-on 40” Chuck Air Hose |
| – 45-Degree Dually Extended Reach Chuck |
| – Air Source relocation Kit |
| – Rubber-Tipped Blow Gun |
| – 1/4” NPT (F) Quick Connect Coupler |
| – 1/4” NPT (F) Quick Connect Stud |
| – 5pc. Tank Port Fittings Kit (For 200 PSI Rated Systems) |
| – VIAIR® Storage Bag |
| – Installation Instructions |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 33% @ 100 PSI |
| – Max. Working Pressure: 150 PSI |
| – Max. 12V Amp Draw: 30-Amps |
| – Ingress Protection Rating: IP67 |
| – Max Ambient Temp: +158°F |
| – Min Ambient Temp: -40°F |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
| 12-Volt Compressor | |||||
|---|---|---|---|---|---|
| PSI | CFM | A | BAR | LPM | A |
| 0 | 2.62 | 16 | 0 | 74.0 | 16 |
| 10 | 2.39 | 18 | 1.0 | 65.0 | 20 |
| 20 | 2.21 | 20 | 2.0 | 60.0 | 23 |
| 30 | 2.11 | 22 | 3.0 | 56.0 | 25 |
| 40 | 2.01 | 24 | 4.0 | 53.0 | 27 |
| 50 | 1.93 | 25 | 5.0 | 49.0 | 28 |
| 60 | 1.84 | 26 | 6.0 | 46.0 | 28 |
| 70 | 1.73 | 27 | 7.0 | 42.0 | 28 |
| 80 | 1.65 | 27 | 8.0 | 38.0 | 28 |
| 90 | 1.52 | 27 | 9.0 | 35.0 | 27 |
| 100 | 1.45 | 27 | 10.0 | 31.0 | 27 |
| 110 | 1.35 | 27 | |||
| 120 | 1.26 | 27 | |||
| 130 | 1.19 | 27 | |||
| 140 | 1.08 | 27 | |||
| 150 | 1.01 | 26 | |||
* Supply Voltage: 13.8 Volts
FILL RATES
| 245/75R16 | Fill Rate |
|---|---|
| 0 to 80 PSI | 7 min. 05 sec. (± 15 sec.) |
| 40 to 50 PSI | 15 sec. (± 03 sec.) |
| 50 to 60 PSI | 20 sec. (± 03 sec.) |
| 70 to 80 PSI | 30 sec. (± 03 sec.) |
| 1.5 Gallon Tank | Fill Rate |
| 0 to 145 PSI | 1 min. 20 sec. (± 05 sec.) |
| 110 to 145 PSI | 25 sec. (± 03 sec.) |
* Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to 
