| FEATURES |
|---|
| – 485C Platinum VIAIR® Compressor w/ Thermal Overload Protector |
| – 1.5 Gallon Matte Black VIAIR® Air Tank (200 PSI) |
| – Illuminated Dash Panel Gauge Kit, Black Face 200 PSI |
| – Sealed Pressure Switch (165 PSI on, 200 PSI off) |
| – 40-Amp Sealed 4-Prong Relay |
| – Mini ANL Fuse Holder w/ 40-Amp Fuse |
| – RV Tire Inflation Gun w/ Digital 180 PSI Gauge |
| – 30ft. Inside Braided Black Coil Hose w/ Quick Connect & stud |
| – 90-Degree Twist-on 40” Chuck Air Hose |
| – 45-Degree Dually Extended Reach Chuck |
| – Air Source relocation Kit |
| – Rubber-Tipped Blow Gun |
| – 1/4” (M) to 1/8” (F) NPT Reducer |
| – 3/8” (F) to 1/4” (M) NPT Reducer |
| – 5pc. Tank Port Fittings Kit (For 200 PSI Rated Systems) |
| – VIAIR® Storage Bag |
| – Installation Instructions |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 100% @ 200 PSI |
| – Max. Working Pressure: 200 PSI |
| – Max. 12V Amp Draw: 23-Amps |
| – Ingress Protection Rating: IP67 |
| – Max Ambient Temp: +158°F |
| – Min Ambient Temp: -40°F |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
| PSI | CFM | A | BAR | LPM | A |
|---|---|---|---|---|---|
| 0 | 2.24 | 12 | 0 | 70.0 | 12 |
| 10 | 1.84 | 14 | 1.0 | 51.0 | 15 |
| 20 | 1.75 | 16 | 2.0 | 47.0 | 16 |
| 30 | 1.67 | 17 | 3.0 | 44.0 | 18 |
| 40 | 1.61 | 18 | 4.0 | 41.0 | 20 |
| 50 | 1.54 | 19 | 5.0 | 38.0 | 21 |
| 60 | 1.47 | 20 | 6.0 | 35.0 | 21 |
| 70 | 1.42 | 21 | 7.0 | 32.0 | 22 |
| 80 | 1.36 | 21 | 8.0 | 29.0 | 22 |
| 90 | 1.30 | 22 | 9.0 | 27.0 | 22 |
| 100 | 1.23 | 22 | 10.0 | 25.0 | 23 |
| 110 | 1.17 | 22 | 11.0 | 22.0 | 22 |
| 120 | 1.11 | 22 | 12.0 | 21.0 | 21 |
| 130 | 1.06 | 22 | 13.0 | 21.0 | 21 |
| 140 | 1.01 | 23 | 13.8 | 21.0 | 21 |
| 150 | 0.97 | 22 | |||
| 160 | 0.92 | 22 | |||
| 170 | 0.88 | 22 | |||
| 180 | 0.84 | 21 | |||
| 190 | 0.77 | 21 | |||
| 200 | 0.73 | 21 |
* Supply Voltage: 13.8 Volts
FILL RATES
| 245/75R16 | Fill Rate |
|---|---|
| 0 to 80 PSI | 8 min. 25 sec. (± 15 sec.) |
| 40 to 50 PSI | 10 sec. (± 03 sec.) |
| 50 to 60 PSI | 12 sec. (± 03 sec.) |
| 70 to 80 PSI | 15 sec. (± 03 sec.) |
| 1.5 Gallon Tank | Fill Rate |
| 0 to 200 PSI | 2 min. 40 sec. (± 10 sec.) |
| 165 to 200 PSI | 45 sec. (± 03 sec.) |
* Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to 
