FEATURES |
---|
– Thermal Overload Protector |
– 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge |
– Aluminum Sand Tray with Vibration Isolators |
– Deluxe Dual Compartment Carry Bag |
– 40-amp Inline Fuse Holder |
– Dual Battery Clamps |
– 3 pc. Inflation Tips Kit |
– Presta Valve Adaptor |
– |
– |
– |
SPECIFICATIONS |
---|
– 12-Volt |
– Permanent Magnetic Motor |
– Duty Cycle: 33% @ 100 PSI |
– Max. Working Pressure: 120 PSI |
– Max. Amp Draw: 20-Amps |
– Ingress Protection Rating: IP54 |
– Max Ambient Temp: +158°F |
– Min Ambient Temp: -4°F |
– Dimensions: 9″L x 4.9″W x 7.5″H |
– Net Weight: 8.70 lbs. |
– Power Cord Length: 8 ft. |
– Air Hose Length: 25 ft. |
RECOMMENDED COMPONENTS | |||||
---|---|---|---|---|---|
– 30ft. Extension Hose (P/N 00031) | |||||
– 3-IN-1 Air Down Gauge Twist On Chuck (P/N 00032) |
|||||
– 3-IN-1 Air Down Gauge Press On Chuck (P/N 00033) |
|||||
– 2.0″ Tire Gauge 0-100 PSI (P/N 90072) | |||||
– | |||||
– | |||||
– | |||||
– | |||||
– | |||||
– |
Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit (P/N 90145).
PERFORMANCE DATA
PSI | CFM | A | BAR | LPM | A |
---|---|---|---|---|---|
0 | 2.30 | 17 | 0 | 65.0 | 17 |
10 | 1.94 | 21 | 1.0 | 52.6 | 22 |
20 | 1.76 | 23 | 2.0 | 46.3 | 24 |
30 | 1.62 | 24 | 3.0 | 40.5 | 26 |
40 | 1.48 | 25 | 4.0 | 35.7 | 27 |
50 | 1.34 | 27 | 5.0 | 31.0 | 27 |
60 | 1.24 | 27 | 6.0 | 26.6 | 28 |
70 | 1.13 | 27 | 7.0 | 23.6 | 29 |
80 | 0.99 | 28 | 8.0 | 19.1 | 30 |
90 | 0.92 | 28 | 9.0 | 15.8 | 29 |
100 | 0.85 | 29 | 10.0 | 14.0 | 28 |
110 | 0.74 | 30 | |||
120 | 0.63 | 30 | |||
130 | 0.56 | 29 | |||
140 | 0.53 | 28 | |||
150 | 0.46 | 27 |
* Supply Voltage: 13.8 Volts
FILL RATES
31″ x 10.5″ | Fill Rate |
---|---|
0 to 30 PSI | 3 min. 25 sec. (± 10 sec.) |
15 to 30 PSI | 2 min. 00 sec. (± 05 sec.) |
33″ x 12.5″ | Fill Rate |
0 to 30 PSI | 5 min. 00 sec. (± 10 sec.) |
15 to 30 PSI | 2 min. 45 sec.(± 05 sec.) |