FEATURES |
---|
– Check Valve |
– Vibration Isolators |
– Mounting Hardware |
– Installation Instructions |
– |
– |
– |
– |
– |
– |
– |
– |
– |
SPECIFICATIONS |
---|
– 12-Volt / 24-Volt |
– Permanent Magnetic Motor |
– Duty Cycle: 20% @ 100 PSI |
– Max. Working Pressure: 150 PSI |
– Max. Air Tank Size: 1.0 Gallon |
– Max. 12V Amp Draw: 15-Amps |
– Max. 24V Amp Draw: 8-Amps |
– Ingress Protection Rating: IP67 |
– Max Ambient Temp: +158°F |
– Min Ambient Temp: -40°F |
– Dimensions: 6.9″L x 3.3″W x 5.0″H |
– Net Weight: 4.10 lbs. |
– |
RECOMMENDED COMPONENTS | |||||
---|---|---|---|---|---|
– 0.5 Gallon Tank (P/N 91005) | |||||
– 1.0 Gallon Tank (P/N 91010, 91014) | |||||
– 12V Relay (P/N 93940) | |||||
– Sealed Relay (P/N 93944, 93949) | |||||
– Pressure Switches (P/N 90100, 90101, 90102) |
|||||
– Pressure Switches w/ Relay (P/N 90110, 90111, 90113) |
|||||
– Sealed Pressure Switch (P/N 90212, 90217, 90223) |
|||||
– PTFE Lined Leader Hose (P/N 92801) | |||||
– | |||||
– |
* For 12V Only.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
12-Volt Compressor | |||||
---|---|---|---|---|---|
PSI | CFM | A | BAR | LPM | A |
0 | 1.37 | 5 | 0 | 38.7 | 5 |
10 | 1.20 | 6 | 1.0 | 32.0 | 7 |
20 | 1.07 | 8 | 2.0 | 29.3 | 9 |
30 | 1.02 | 9 | 3.0 | 24.3 | 10 |
40 | 0.91 | 10 | 4.0 | 22.7 | 11 |
50 | 0.82 | 11 | 5.0 | 21.7 | 12 |
60 | 0.79 | 11 | 6.0 | 20.7 | 12 |
70 | 0.78 | 11 | 7.0 | 19.0 | 12 |
80 | 0.74 | 12 | 8.0 | 17.7 | 12 |
90 | 0.72 | 12 | 9.0 | 16.0 | 12 |
100 | 0.69 | 12 | 10.0 | 14.0 | 12 |
110 | 0.66 | 12 | |||
120 | 0.61 | 12 | |||
130 | 0.58 | 11 | |||
140 | 0.54 | 12 | |||
150 | 0.48 | 12 |
* Supply Voltage: 13.8 Volts
24-Volt Compressor | |||||
---|---|---|---|---|---|
PSI | CFM | A | BAR | LPM | A |
0 | 1.55 | 3 | 0 | 44.0 | 3 |
10 | 1.29 | 3 | 1.0 | 34.7 | 4 |
20 | 1.18 | 4 | 2.0 | 31.7 | 5 |
30 | 1.08 | 5 | 3.0 | 28.0 | 5 |
40 | 1.02 | 5 | 4.0 | 25.7 | 6 |
50 | 0.95 | 5 | 5.0 | 24.3 | 6 |
60 | 0.91 | 6 | 6.0 | 22.3 | 6 |
70 | 0.86 | 6 | 7.0 | 20.3 | 6 |
80 | 0.82 | 6 | 8.0 | 18.0 | 6 |
90 | 0.75 | 6 | 9.0 | 16.3 | 6 |
100 | 0.66 | 6 | 10.0 | 14.7 | 6 |
110 | 0.67 | 6 | |||
120 | 0.62 | 6 | |||
130 | 0.58 | 6 | |||
140 | 0.54 | 6 | |||
150 | 0.48 | 6 |
* Supply Voltage: 28.0 Volts
FILL RATES
12-Volt Compressor | |
---|---|
0.5 Gallon Tank | Fill Rate |
0 to 105 PSI | 35 sec. (± 05 sec.) |
85 to 105 PSI | 10 sec. (± 03 sec.) |
0 to 145 PSI | 1 min. 00 sec. (± 05 sec.) |
110 to 145 PSI | 20 sec. (± 03 sec.) |
1.0 Gallon Tank | Fill Rate |
0 to 105 PSI | 1 min. 10 sec. (± 10 sec.) |
85 to 105 PSI | 20 sec. (± 03 sec.) |
0 to 145 PSI | 1 min. 55 sec. (± 10 sec.) |
110 to 145 PSI | 40 sec. (± 05 sec.) |
24-Volt Compressor | |
---|---|
0.5 Gallon Tank | Fill Rate |
0 to 105 PSI | 30 sec. (± 03 sec.) |
85 to 105 PSI | 6 sec. (± 02 sec.) |
0 to 145 PSI | 58 sec. (± 05 sec.) |
110 to 145 PSI | 19 sec. (± 03 sec.) |
1.0 Gallon Tank | Fill Rate |
0 to 105 PSI | 1 min. 3 sec. (± 05 sec.) |
85 to 105 PSI | 13 sec. (± 02 sec.) |
0 to 145 PSI | 1 min. 45 sec. (± 10 sec.) |
110 to 145 PSI | 35 sec. (± 05 sec.) |
* Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary.