| FEATURES |
|---|
| – Thermal Overload Protector |
| – Heavy Duty Steel Stand with Vibration Isolators |
| – 120 PSI Pressure Gauge with Rubber Boot |
| – Tire Chuck with Built-in Bleeder Valve |
| – 30-Amp Inline Fuse Holder |
| – Dual Battery Clamps |
| – Deluxe Carry Bag |
| – 3 pc. Inflation Tips Kit |
| – |
| – |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 30 min. @ 30 PSI |
| – Max. Working Pressure: 120 PSI |
| – Max. Amp Draw: 23-Amps |
| – Ingress Protection Rating: IP54 |
| – Dimensions: 6.8″L x 3.7″W x 6.5″H |
| – Net Weight: 5.75 lbs. |
| – Power Cord Length: 12 ft. |
| – Air Hose Length: 5 ft. |
| RECOMMENDED COMPONENTS | |||||
|---|---|---|---|---|---|
| – 6ft. Portable Compressor Air Extension Hose (P/N 00016) | |||||
* For 12V Only.
Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering. The 90P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 90P does not work with the VIAIR Winterization Kit (P/N 90145).
PERFORMANCE DATA
| PSI | CFM | A | BAR | LPM | A |
|---|---|---|---|---|---|
| 0 | 1.21 | 15 | 0 | 34.3 | 15 |
| 10 | 1.19 | 16 | 1.0 | 32.9 | 16 |
| 20 | 1.13 | 17 | 2.0 | 30.2 | 18 |
| 30 | 1.06 | 18 | 3.0 | 27.1 | 19 |
| 40 | 0.98 | 19 | 4.0 | 24.4 | 20 |
| 50 | 0.92 | 20 | 5.0 | 22.2 | 21 |
| 60 | 0.85 | 20 | 6.0 | 19.7 | 22 |
| 70 | 0.80 | 21 | 7.0 | 17.8 | 23 |
| 80 | 0.73 | 21 | 8.0 | 15.7 | 21 |
| 90 | 0.68 | 22 | |||
| 100 | 0.64 | 23 | |||
| 110 | 0.58 | 22 | |||
| 120 | 0.54 | 21 |
* Supply Voltage: 13.8 Volts
FILL RATES
| 195/70R14 | Fill Rate |
|---|---|
| 20 to 30 PSI | 35 sec. (± 05 sec.) |
| 30 to 40 PSI | 40 sec. (± 05 sec.) |
| 225/60R18 | Fill Rate |
| 20 to 30 PSI | 50 sec. (± 05 sec.) |
| 30 to 40 PSI | 1 min. 05 sec. (± 05 sec.) |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to 
