X’Treme Duty OBA
For up to 37″ Tires
P/N 10009 – 150 PSI / 2.68 CFM
VIAIR’s X’treme Duty Onboard Air System is a pre-packaged compressed air solution that provides two 350C, 100% duty cycle compressors, a2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
| FEATURES |
|---|
| – 2.0 Gallon VIAIR Air Tank |
| – (2) 350C VIAIR Compressors w/Thermal Overload Protectors |
| – 30ft. Coil Hose with Quick Connects |
| – Tire Inflation Gun with 160 PSI Gauge |
| – Dash Panel Gauge with ON/OFF Switch |
| – 0-220 PSI Pressure Regulator |
| – Blow Gun Air Tool |
| – Sealed Pressure Switch (110 PSI on, 145 PSI off) |
| – (2) 40-amp Relays |
| – (2) T-Fittings (1/4” (M) x 1/4″ (F) x 1/8” (F)) |
| – 1/4” Quick Connect Stud (F) |
| – 1/4” Quick Connect Coupler (F) |
| – 1/4” 175 PSI Safety Valve |
| – 1/4” Drain Cock |
| – (2) 1/8” BSP to 1/4” NPT |
| – (4) 1/4” Compression Fittings |
| – 20ft. 12-Gauge Wire with Inline Fuse Holder |
| – 4” Strip of Continuous Grommet Material |
| – Accessory Airline |
| – Electrical Connections |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 100% @ 100 PSI |
| – Max. Working Pressure: 150 PSI |
| – Max. Amp Draw: 37 Amps |
| – Ingress Protection Rating: IP67 |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
PERFORMANCE DATA
| PSI | CFM | A | BAR | LPM | A |
|---|---|---|---|---|---|
| 0 | 2.68 | 23 | 0 | 76.0 | 23 |
| 10 | 2.30 | 26 | 1.0 | 64.0 | 28 |
| 20 | 2.22 | 29 | 2.0 | 60.0 | 31 |
| 30 | 2.12 | 31 | 3.0 | 55.0 | 34 |
| 40 | 1.98 | 33 | 4.0 | 51.5 | 35 |
| 50 | 1.87 | 34 | 5.0 | 48.0 | 36 |
| 60 | 1.80 | 35 | 6.0 | 45.5 | 37 |
| 70 | 1.73 | 35 | 7.0 | 43.0 | 37 |
| 80 | 1.66 | 36 | 8.0 | 40.0 | 37 |
| 90 | 1.56 | 36 | 9.0 | 36.0 | 37 |
| 100 | 1.52 | 37 | 10.0 | 31.5 | 37 |
| 110 | 1.45 | 37 | |||
| 120 | 1.38 | 37 | |||
| 130 | 1.27 | 37 | |||
| 140 | 1.17 | 37 | |||
| 150 | 1.06 | 37 |
* Supply Voltage: 13.8 Volts
FILL RATES
| 2.0 Gallon Tank | Fill Rate |
|---|---|
| 0 to 145 PSI | 1 min. 40 sec. (± 05 sec.) |
| 110 to 145 PSI | 32 sec. (± 03 sec.) |
| 35″ x 12.5″ | Fill Rate |
| 0 to 30 PSI | 4 min. 40 sec. (± 10 sec.) |
| 15 to 30 PSI | 2 min. 20 sec. (± 05 sec.) |
| 37″ x 12.5″ | Fill Rate |
| 0 to 30 PSI | 5 min. 00 sec. (± 15 sec.) |
| 15 to 30 PSI | 2 min. 40 sec. (± 10 sec.) |
MANUAL
WIRING DIAGRAM
PLUMBING DIAGRAM
DIMENSIONAL DRAWING
X'Treme Duty OBA Dimensional Drawing
[collapse]
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
