| FEATURES |
|---|
| – 2.0 Gallon VIAIR Air Tank |
| – 275C VIAIR Air Compressor w/Thermal Overload Protector |
| – Pressure Switch (90 PSI on, 120 PSI off) |
| – 40-Amp Relay |
| – 1/4” NPT 145 PSI Safety Valve |
| – 1/4” Drain Cock |
| – 1/4” Compression Fitting |
| – 20ft. 16 Gauge Wire with Inline Fuse Holder |
| – Accessory Airline |
| – Electrical Connections |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 25% @ 100 PSI |
| – Max. Working Pressure: 120 PSI |
| – Max. Amp Draw: 18 Amps |
| – Ingress Protection Rating: IP54 |
| – |
| – |
| – |
| – |
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
| PSI | CFM | A | BAR | LPM | A |
|---|---|---|---|---|---|
| 0 | 2.03 | 10 | 0 | 57.5 | 10 |
| 10 | 1.17 | 12 | 1.0 | 32.0 | 13 |
| 20 | 1.11 | 13 | 2.0 | 30.0 | 14 |
| 30 | 1.04 | 15 | 3.0 | 28.5 | 16 |
| 40 | 1.01 | 15 | 4.0 | 26.5 | 16 |
| 50 | 0.97 | 16 | 5.0 | 24.5 | 17 |
| 60 | 0.92 | 16 | 6.0 | 22.5 | 17 |
| 70 | 0.88 | 17 | 7.0 | 21.5 | 18 |
| 80 | 0.83 | 17 | 8.0 | 20.0 | 18 |
| 90 | 0.79 | 17 | |||
| 100 | 0.76 | 18 | |||
| 110 | 0.72 | 18 | |||
| 120 | 0.69 | 18 |
* Supply Voltage: 13.8 Volts
FILL RATES
| 2.0 Gallon Tank | Fill Rate |
|---|---|
| 0 to 120 PSI | 2 min. 22 sec. (± 10 sec.) |
| 90 to 120 PSI | 46 sec. (± 05 sec.) |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to 
