| FEATURES |
|---|
| – 2.5 Gallon 150 PSI VIAIR Air Tank |
| – (2) 450C VIAIR Compressors w/Thermal Overload Protectors |
| – 30ft. Coil Hose with Quick Connects |
| – Tire Inflation Gun with 200 PSI Gauge |
| – 0-220 PSI Pressure Regulator |
| – Sealed Pressure Switch (110 PSI on, 145 PSI off) |
| – 150 PSI Illuminated Dash Panel Gauge |
| – (2) 40-Amp Relays |
| – Inline Fuse Holder |
| – 1/4” Quick Connect Coupler (M) |
| – 1/4” 175 PSI Safety Valve |
| – 1/4” Drain Cock |
| – (2) 1/8” BSP to 1/4” NPT |
| – (3) 1/4” Compression Fittings |
| – 5pc. 1/4” NPT Plugs Kit |
| – 6-Port Billet Manifold with Mounting Bracket (1/4”) |
| – (2) 20ft. 1/4” Air Line Included |
| – Electrical Connections |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 100% @ 100 PSI |
| – Max. Working Pressure: 150 PSI |
| – Max. Amp Draw: 44-Amps |
| – Ingress Protection Rating: IP67 |
| – Max Ambient Temp: +158°F |
| – Min Ambient Temp: -40°F |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
All Fittings are NPT rated unless otherwise noted. Wiring harness NOT included..
Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
| PSI | CFM | A | BAR | LPM | A |
|---|---|---|---|---|---|
| 0 | 3.28 | 28 | 0 | 93.0 | 28 |
| 10 | 3.04 | 29 | 1.0 | 83.0 | 30 |
| 20 | 2.79 | 32 | 2.0 | 75.4 | 34 |
| 30 | 2.65 | 34 | 3.0 | 71.0 | 37 |
| 40 | 2.54 | 36 | 4.0 | 66.6 | 40 |
| 50 | 2.44 | 38 | 5.0 | 61.0 | 41 |
| 60 | 2.33 | 40 | 6.0 | 56.0 | 42 |
| 70 | 2.19 | 41 | 7.0 | 52.0 | 44 |
| 80 | 2.05 | 42 | 8.0 | 47.0 | 43 |
| 90 | 1.94 | 43 | 9.0 | 42.3 | 42 |
| 100 | 1.85 | 44 | 10.0 | 37.5 | 41 |
| 110 | 1.72 | 44 | |||
| 120 | 1.62 | 43 | |||
| 130 | 1.50 | 42 | |||
| 140 | 1.38 | 41 | |||
| 150 | 1.27 | 41 |
* Supply Voltage: 13.8 Volts
FILL RATES
| 2.5 Gallon Tank | Fill Rate |
|---|---|
| 0 to 145 PSI | 1 min. 30 sec. (± 05 sec.) |
| 110 to 145 PSI | 31 sec. (± 03 sec.) |
| 37″ x 12.5″ | Fill Rate |
| 0 to 30 PSI | 3 min. 50 sec. (± 10 sec.) |
| 15 to 30 PSI | 1 min. 55 sec. (± 05 sec.) |
| 40″ x 15.5″ | Fill Rate |
| 0 to 30 PSI | 4 min. 15 sec. (± 10 sec.) |
| 15 to 30 PSI | 2 min. 15 sec. (± 05 sec.) |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to 
