NOTE: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
Check Valves
P/N 92823 – 1/8″ (M) TO 1/8″ (F) – (O.D. 14mm)
P/N 92824 – 1/8″ (M) TO 1/8″ (F) – (O.D. 16mm)
P/N 92825 – 1/8″ (F) TO 1/8″ (M) – (O.D. 16mm)
P/N 92830 – 1/4″ for IG-Series (NPT to JIC Fitting)
P/N 92831 – 1/4″ (F) TO 1/4″ (M)
P/N 92832 – 1/4″ (M) TO 1/4″ (F)
P/N 92833 – 3/8″ (F) TO 3/8″ (M)