325C Compressor
No Leader Hose or Check Valve
P/N 32534 – 150 PSI / 1.59 CFM
The 325C-12V compressor works with low amp draw. Features include an air line for remote mount air filter installation, vibration isolators and insulated wiring for simple installation.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
| FEATURES |
|---|
| – Thermal Overload Protector |
| – Mounting Hardware |
| – Vibration Isolators |
| – Air Line for Remote Mount Air Filter |
| – Remote Mount Air Filter Assembly |
| – (2) Replacement Air Filter Elements |
| – Installation Instructions |
| – |
| – |
| – |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 33% @ 100 PSI |
| – Max. Working Pressure: 150 PSI |
| – Max. Air Tank Size: 5.0 Gallon |
| – Max. 12V Amp Draw: 21 Amps |
| – 1/4″ NPT Intake Port |
| – Ingress Protection Rating: IP67 |
| – Dimensions: 8″L x 4″W x 6.75″H |
| – Net Weight: 7.5 lbs. |
| RECOMMENDED COMPONENTS | |||||
|---|---|---|---|---|---|
| – 2.5 Gallon Tank (P/N 91028) | |||||
| – 5.0 Gallon Tank (P/N 91050) | |||||
| – 12V Relay (P/N 93940) | |||||
| – Pressure Switches (P/N 90100, 90102) | |||||
| – Pressure Switches with Relay (P/N 90110*, 90111, 90113) | |||||
| – Sealed Pressure Switches (P/N 90217, 90223, 90227) | |||||
| – Leader Hose with Check Valve (P/N 92793) | |||||
* *For 12V Only.
PERFORMANCE DATA
| 12-Volt Compressor | |||||
|---|---|---|---|---|---|
| PSI | CFM | A | BAR | LPM | A |
| 0 | 1.59 | 14 | 0 | 45.0 | 14 |
| 10 | 1.40 | 16 | 1.0 | 37.6 | 16 |
| 20 | 1.24 | 16 | 2.0 | 34.1 | 18 |
| 30 | 1.20 | 18 | 3.0 | 32.3 | 18 |
| 40 | 1.17 | 18 | 4.0 | 29.1 | 20 |
| 50 | 1.08 | 19 | 5.0 | 26.0 | 21 |
| 60 | 1.01 | 20 | 6.0 | 23.7 | 21 |
| 70 | 0.93 | 21 | 7.0 | 21.5 | 21 |
| 80 | 0.87 | 21 | 8.0 | 19.7 | 21 |
| 90 | 0.82 | 21 | 9.0 | 18.0 | 21 |
| 100 | 0.77 | 21 | 10.0 | 16.5 | 21 |
| 110 | 0.72 | 21 | |||
| 120 | 0.68 | 21 | |||
| 130 | 0.64 | 21 | |||
| 140 | 0.60 | 21 | |||
| 150 | 0.57 | 21 | |||
* Supply Voltage: 13.8 Volts
FILL RATES
| 12-Volt Compressor | |
|---|---|
| 2.5 Gallon Tank | Fill Rate |
| 0 to 105 PSI | 2 min. 35 sec. (± 10 sec.) |
| 85 to 105 PSI | 40 sec. (± 05 sec.) |
| 0 to 145 PSI | 4 min. 15 sec. (± 10 sec.) |
| 110 to 145 PSI | 1 min. 25 sec. (± 05 sec.) |
| 5.0 Gallon Tank | Fill Rate |
| 0 to 105 PSI | 5 min. 15 sec. (± 10 sec.) |
| 85 to 105 PSI | 1 min. 25 sec. (± 05 sec.) |
| 0 to 145 PSI | 8 min. 45 sec. (± 15 sec.) |
| 110 to 145 PSI | 2 min. 55 sec. (± 10 sec.) |
MANUAL
WIRING DIAGRAM
DIMENSIONAL DRAWING
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
