VIAIR “C” model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All “C” model VIAIR compressors (except certain 90 & 100 series units) are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
Note: • Always operate the compressor at or below the MAXIMUM PRESSURE RATING of the air compressor. Always observe the MAXIMUM DUTY CYCLE of the air compressor. Operation exceeding maximum pressure ratings and/or duty cycle will result in damage to the air compressor.
-
90C
120 PSI /1.03 CFM
-
92C
120 PSI /1.03 CFM -
95C120 PSI / 1.03 CFM (12V)
120 PSI / 1.03 CFM (24V) -
97C130 PSI / 1.53 CFM (12V)
130 PSI / 1.27 CFM (24V) -
98C
130 PSI / 1.53 CFM
-
100C
130 PSI / 1.27 CFM
-
100C
(No Leader Hose or Check Valve) 130 PSI / 1.27 CFM
-
100C
(Omega Bracket) 130 PSI / 1.27 CFM -
275C150 PSI / 2.03 CFM
-
280C
150 PSI / 1.59 CFM -
325C150 PSI / 1.59 CFM (12V)
150 PSI / 1.80 CFM (24V) -
325C
(No Leader Hose or Check Valve) 150 PSI / 1.59 CFM -
350C150 PSI / 1.52 CFM -
380C200 PSI / 1.58 CFM -
400C150 PSI / 2.62 CFM -
420C150 PSI / 2.95 CFM -
450C150 PSI / 1.80 CFM -
460C150 PSI / 1.80 CFM -
480C200 PSI / 1.86 CFM