200 PSI Air Source Kit
200 PSI Air Source Kit
Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8-inch air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. A 40-amp relay and an appropriately-rated fuse is recommended for use with this unit.
200 PSI Air Source Kit
Quality Standard
ISO 9001
12V & 24V
Oil-less & Direct-Drive
Unmatched Testing
Aims for 0% failure rate
What’s in the Box
Specifications
Performance
Fill Rates
Resources
12-VOLT COMPRESSOR - Supply Voltage 13.8 Volts
Product Resources
Find all the information available for this product
All third party product names, logos, and brands are property of their respective owners. All company, product service and trademark names are for identification purposes only. Use of these names, logos, and brands does not imply ownership or endorsement.
Warning:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov