VIAIR Corporation - High-Flow Air Source Kit Part No. 20008

Home > Products > Air Source Kits > Fast-Fill 200 PSI Air Source Kit

High-Flow 200 PSI Air Source Kits come with a powerful, low amp-draw 480C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 3/8-inch port compression fitting for 1/2-inch air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. A 40-amp relay and an appropriately-rated fuse is recommended for use with this unit.

Included Parts
- 480C Pewter Air Compressor
- 2 Gallon Air Tank
- Pressure Switch (165 PSI On / 200 PSI Off)
- Safety Valve (250 PSI)
- Drain Cock
- Leader Hose with Check Valve

Specifications
12-Volt
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 PSI
Max. Working Pressure: 200 PSI
Max. Amp Draw: 20 Amps

Tech Links
Dimensional Drawings

Performance Data
PSI	CFM	A	BAR	LPM	A
0	1.76	10	0	50.0	10
10	1.66	12	1.0	46.0	13
20	1.59	14	2.0	43.0	15
30	1.52	15	3.0	40.5	17
40	1.45	16	4.0	38.5	18
50	1.41	17	5.0	35.5	19
60	1.34	18	6.0	33.0	19
70	1.27	18	7.0	31.5	19
80	1.20	19	8.0	29.5	20
90	1.16	19	9.0	27.0	20
100	1.13	19	10.0	25.0	19
110	1.06	20	11.0	23.0	19
120	1.02	20	12.0	20.5	19
130	0.95	20	13.0	18.0	18
140	0.92	19	14.0	15.5	18
150	0.85	19
160	0.81	19
170	0.74	19
180	0.70	19
190	0.63	18
200	0.56	18	*Supply Voltage: 13.8 Volts

Fill Rates
2.0 Gallon Tank	Fill Rate
0 To 200 PSI	3 Min. 56 Sec.
165 To 200 PSI	1 Min. 02 Sec.