VIAIR Corporation - X'treme Duty OBA Part No. 10009

Home > Products > Onboard Air Systems > X'treme Duty

VIAIR’s X’treme Duty Onboard Air System is a pre-packaged compressed air solution that provides two 350C, 100% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.

Included Parts
- 2.0 Gallon VIAIR Air Tank
- (2) 350C VIAIR Compressors
- 30ft. Coil Hose w/ Quick Connects
- Tire Inflation Gun with 200 PSI Gauge
- 0-150 PSI Pressure Regulator
- Blow Gun Air Tool
- 1/4” NPT Quick Connect Coupler (F)
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch (110 PSI on, 150 PSI off)
- (2) 40-amp Relays
- Inline Fuse Holder w/ Fuse
- 1/4” NPT 175 PSI Safety Valve
- 1/4” NPT Drain Cock
- (2) 1/8” BSP to 1/4” NPT (Air Locker Use)
- (5) 1/4” NPT Compression Fittings
- 4” Strip of Continuous Grommet Material
- 20ft. 12-Gauge Wire
- T-Fitting (1/4”(M) x 1/4”(F) x 1/8”(F))
- Electrical Connections

Specifications
12-Volt
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 PSI
Max. Working Pressure: 150 PSI
Max. Amp Draw: 29 Amps

Tech Links
Dimensional Drawings
Recommended Wiring Diagram
Recommended Plumbing Diagram

Performance Data
PSI	CFM	A	BAR	LPM	A
0	2.68	17	0	76.0	17
10	2.30	19	1.0	64.0	21
20	2.22	21	2.0	60.0	23
30	2.12	23	3.0	55.0	25
40	1.98	25	4.0	51.5	26
50	1.87	26	5.0	48.5	27
60	1.80	27	6.0	45.5	28
70	1.73	27	7.0	43.0	28
80	1.66	28	8.0	40.0	28
90	1.56	28	9.0	36.0	29
100	1.52	28	10.0	31.5	28
110	1.45	28
120	1.38	28
130	1.27	29
140	1.17	29
150	1.06	28	*Supply Voltage: 13.8 Volts

Fill Rates
2.0 Gallon Tank	Fill Rate
0 to 145 PSI	1 Min. 57 Sec.
110 to 145 PSI	32 Sec.
35" x 12.5"	Fill Rate
0 to 30 PSI	5 Min. 03 Sec.
15 to 30 PSI	2 Min. 30 Sec.
37" x 12.5"	Fill Rate
0 to 30 PSI	5 Min. 42 Sec.
15 to 30 PSI	2 Min. 50 Sec.