viair_menu
Home > Products > Onboard Air Systems > Ultra-Light Duty
ultra-light duty oba p/n 10000
P/N 10000 Ultra Light Duty Onboard Air System can be used to pressurize the included one gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provides a reliable smaller volume, 105 psi air source, in a cost effective package.
Included Parts
- 1.0 Gallon VIAIR Air Tank
- 98C VIAIR Air Compressor
- Omega Bracket w/ Mounting Hardware
- Accessory Airline
- Pressure Switch (85 PSI on, 105 PSI off)
- 40 - Amp Relay
- (2) T-Fittings
- 1/4” NPT Drain Cock
- 1/4” NPT Compression Fitting
- 1/4” Male NPT Plug
- 145 PSI Safety Valve
- (2) 1/4” Male NPT to 1/8” Female BSP
- 20-ft. 12 Gauge Wire
- Inline Fuse Holder
- Electrical Connections
Specifications
12-Volt
Permanent Magnetic Motor
Duty Cycle: 10% @ 100 PSI
Max. Working Pressure: 105 PSI
Max. Amp Draw: 12 Amps
Air Tank Temperature Rating: -40°C ~ +80°C
Air Tank Temperature Rating: -40°F ~ +176°F
Tech Links
Dimensional Drawings
Recommended Wiring Diagram
Recommended Plumbing Diagram
Instruction Manual

Performance Data
PSI CFM A BAR LPM A
0 1.53 7 0 43.5 7
10 1.00 9 1.0 28.0 9
20 0.95 10 2.0 25.5 11
30 0.90 11 3.0 23.5 11
40 0.85 11 4.0 21.0 12
50 0.79 12 5.0 18.5 12
60 0.72 12 6.0 17.0 12
70 0.67 12 7.0 15.0 12
80 0.63 12 8.0 12.5 12
90 0.58 12 9.0 10.0 11
100 0.53 12      
110 0.48 12  
120 0.41 12
130 0.35 11 *Supply Voltage: 13.8 Volts
Fill Rates
1.0 Gallon Tank Fill Rate
0 To 105 PSI 1 Min. 35 Sec.
85 To 105 PSI 25 Sec.
Note: Use thread sealant for proper installation. Teflon tape is not recommended.
Properly sealed, recommended torque is 12 to 15 ft. lbs.

HOME | ABOUT | PRODUCTS | MEDIA | NEWS | TECH | CONTACT
Sales@viaircorp.com | Warranty Info | Product Registration | Careers