VIAIR Corporation - Constant Duty OBA Part No. 10007

Home > Products > Onboard Air Systems > Constant Duty

VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.

Included Parts
- 2.5 Gallon VIAIR Air Tank
- 450C VIAIR Compressor
- 35ft. Coil Hose
- 1/4” NPT Quick Connect Stud (F)
- 1/4” NPT Quick Connect Coupler (M)
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch with Relay (110 PSI on, 150 PSI off)
- Reducer (1/8” NPT F to 1/4” NPT M)
- 1/4” NPT 175 PSI Safety Valve
- 1/4” NPT Drain Cock
- (3) 1/4” NPT Compression Fittings
- 4” Strip of Continuous Grommet Material
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- Electrical Connections

Specifications
12-Volt
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 PSI
Max. Working Pressure: 150 PSI
Max. Amp Draw: 19 Amps

Tech Links
Dimensional Drawings
Recommended Wiring Diagram
Recommended Plumbing Diagram

Performance Data
PSI	CFM	A	BAR	LPM	A
0	1.66	11	0	47.0	11
10	1.55	12	1.0	42.0	13
20	1.41	13	2.0	38.5	14
30	1.34	15	3.0	36.5	16
40	1.31	16	4.0	34.0	17
50	1.27	16	5.0	30.5	18
60	1.18	17	6.0	28.0	18
70	1.09	18	7.0	26.5	19
80	1.04	18	8.0	25.0	19
90	0.97	18	9.0	23.0	18
100	0.94	19	10.0	21.0	18
110	0.90	19
120	0.86	19
130	0.81	18
140	0.76	18
150	0.72	18	*Supply Voltage: 13.8 Volts

Fill Rates
2.5 Gallon Tank	Fill Rate
0 to 145 PSI	3 Min. 02 Sec.
110 to 145 PSI	59 Sec.
35" x 12.5"	Fill Rate
0 to 30 PSI	6 Min. 55 Sec.
15 to 30 PSI	3 Min. 30 Sec.
37" x 12.5"	Fill Rate
0 to 30 PSI	7 Min. 56 Sec.
15 to 30 PSI	4 Min. 09 Sec.